Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Sweep in Orange County: What to Know First
An Olympia Chimney chimney sweep in Orange County typically runs $189 – $329 for a standard open-flue fireplace, and we complete most single-fireplace jobs in 60 – 90 minutes with zero mess left behind. We’re an independent Olympia Chimney service provider, which means we know exactly how these systems behave after five, ten, and twenty seasons of Southland use, but we answer to you, not the manufacturer. If you own a home anywhere from Anaheim Hills to San Clemente and you haven’t had the flue looked at in over a year, call (831) 217-7981 and we’ll give you a written price before anything gets touched.
How Olympia Chimney Products Fail – and How We Fix Them
Danny Cortes, our owner, will tell you that Olympia Chimney builds solid stainless and galvanized systems, but every chimney brand has its habits. Here’s what we actually see on Olympia jobs across Orange County:
- Creosote buildup in Olympia flexible liners above steep-pitch Orange County rooflines. Olympia’s 316Ti flexible liners have a corrugated inner wall that gives creosote a lot of tiny ledges to grab onto. Homes in Foothill Ranch, Trabuco Canyon, and other canyon-facing communities burn more wood in winter, and the creosote layers faster than most owners expect. We pull the liner-specific brushes that match the corrugation profile and remove what a standard flat wire brush leaves behind.
- Galvanized exterior chase covers rusting at the weld seams. On Olympia factory-built chimneys with the galvanized chase top, coastal moisture from Huntington Beach, Newport Beach, and Laguna Niguel works on those seam welds over time. A rusted chase cover is a chimney sweep’s first warning sign, because water dripping down the liner face mixes with creosote into a paste that is miserable to remove and accelerates liner wear. We address it during the sweep and document it with photos.
- Olympia masonry clay flue tiles with spalling at the top course. Orange County’s hot, dry summers followed by Santa Ana winds cause thermal cycling that chips older clay tiles. Damaged top tiles change the draft, which changes how fast creosote builds. We catch this during the Level 1 or Level 2 inspection that comes with the sweep, and we give you honest options, including leaving it alone if it is cosmetic.
- Draft problems traced to Olympia caps clogged with coastal debris or sycamore seed pods. In Fullerton and Placentia, sycamore trees drop seed balls that fit neatly into Olympia’s mesh cap openings. In Seal Beach and Huntington, it’s salt-air corrosion on the mesh. Either way, a blocked cap makes the fireplace smoke back into the living room, and the fix is usually a simple cap cleaning or replacement during the sweep, not a rebuild-level project.
- Aftermarket parts that were never right for the original Olympia system. We see Olympia fireplaces repaired over the years with knockoff refractory panels, wrong-vintage dampers, or universal caps that don’t seat. On every Olympia chimney sweep we check whether the installed components match the system’s model year, because a mismatched damper or cap changes the air dynamics and makes the system harder to keep clean. We use professional-grade replacement brands where needed, including DuraFlex, HeatShield, and Gelco.
Styles & brands we work with





Our Olympia Chimney Chimney Sweep Process
Every Olympia Chimney chimney sweep in Orange County follows the same calm, specific sequence. Here it is, step by step:
- 1
We protect the work area before anything else. Technicians lay drop cloths from the entry door to the hearth and put shoe covers on the moment they arrive. No furniture gets moved without asking. If you have kids or pets, we use quiet tools and pet-safe products wherever there is a choice.
- 2
We inspect first, then sweep. We run a Level 1 or Level 2 inspection (your choice, your budget) before the brushes go up. On Olympia systems, we specifically check the liner, cap, crown, and damper for the failure modes listed above.
- 3
We sweep the flue with brushes matched to the liner profile. For Olympia flexible liners, that means corrugation-matched brushes; for tile flues, the appropriate poly or wire brush. Soot and creosote are contained and removed, never blown back into the room.
- 4
We document everything with photos. You see what we see. If your Olympia system needs more than a sweep, you get a straight explanation with pictures, a written price, and no pressure. If it can wait a year, we say so.
- 5
We clean the firebox and take a photo of the finished area. Before we leave, you get a picture of your spotless hearth. The C.A.R.E. values, every letter, every visit.
- 6
We walk you through what we found and what’s next. No jargon, no rush. If everything is clear, you know it. If something deserves attention, you know that too. Every job is backed by the 365-Day Done Right Promise: if it isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Chimney Sweep Costs in Orange County
We price honestly, in writing, before work starts. Here’s what Olympia Chimney owners in Orange County can expect for common scenarios:
- Standard fireplace sweep, open-flue Olympia system: $189 – $279. Includes inspection, firebox cleanout, cap check, drop cloths, and the clean-up photo.
- Sweep plus Level 2 inspection (for home sale, suspected issues, or first visit after purchase): $289 – $449. Adds video scoping of the flue and a written report with photos.
- Heavy creosote removal, third-degree buildup in an Olympia flexible liner: $329 – $529. Takes longer and requires glazing-specific tools. Most canyon-area homes we see in Trabuco and Silverado fall into this range after two or three seasons between sweeps.
- Cap cleaning or replacement during the sweep: Cap cleaning is often included in the base sweep. A new professional-grade cap, if needed, adds $89 – $199 depending on size and material.
Price moves most on liner type, creosote condition, and roof access difficulty. We will never pad a quote because the brand says “Olympia” on it. Call (831) 217-7981 for a free estimate, and you’ll get the number before we schedule anything.
Why Orange County Homeowners Call Kindling Chimney Orange County for Olympia Chimney Work
Because we write down the price, protect the floors, and stand behind the work in plain language. Every technician arrives background-checked and in uniform, carries drop cloths in hand, and follows the C.A.R.E. values on every visit. A live person answers our phone day and night, which means when you call about your Olympia fireplace in December, you talk to a person, not a recording. We work with professional-grade materials from Olympia Chimney, DuraFlex, HeatShield, Gelco, Famco, and Copperfield, so if your sweep uncovers a liner issue or a failed cap, the replacement part is commercial-grade, not a patch. And the 365-Day Done Right Promise covers every hour of labor we perform. We’re independently owned and operated, part of the Cedarwell family of companies, which was established in 2003. That is a long time to be responsible for other people’s fireplaces.
FAQs
Most Olympia Chimney sweeps in Orange County run between $189 and $329, with heavier creosote jobs and Level 2 video inspections raising the total to $449 or more. The written quote you receive before work starts is the price you pay. Call (831) 217-7981 for an exact number based on your system.
Yes, and Orange County’s climate is part of the reason. Even light, occasional burning produces creosote, and Olympia’s corrugated flexible liners hold onto it faster than smooth-walled flues. Coastal moisture and canyon humidity then mix with that creosote into a sticky layer that gets harder to remove each season. Know what’s in your flue before you light the first fire of the season.
We can handle most cap replacements, damper adjustments, and liner repairs during the same visit. If we find something beyond a standard sweep, we show you the photo, give you a written price, and let you decide on the spot. We install professional-grade replacement components from trusted brands including DuraFlex and Gelco when an OEM Olympia part isn’t necessary or available.
Once a year at minimum, but we recommend twice a year for homes in canyon areas like Silverado Canyon or Modjeska Canyon that burn wood most winter weekends, and annually for coastal homes. The National Fire Protection Association recommends sweeping when creosote reaches 1/8 inch thickness, which most Orange County households reach within a year of regular use.
No. As an independent Olympia Chimney service provider, we’re not authorized by Olympia Chimney, and our work does not void a valid manufacturer warranty. We use warranty-safe methods that match manufacturer guidelines, and we document every finding so you have a written record for any future claim.
Written by Danny Cortes, Owner, Kindling Chimney Orange County at Kindling Chimney Orange County, serving Orange County and nearby areas.